Metal and Plastic Products
Cut and delivered on time to keep your business running strong.
Select Options
Of the 400 series of stainless steels, 400C has the highest carbon content and moderate corrosion resistance and can heat-treat to the highest harness of RC 60. (In contrast, 416 is normally heat treated to RC 26/32)
17-4, also known as 630 stainless, can be heat treated to high levels of strength and hardness, and good for machining and is corrosion resistant. Often used in petroleum and chemical industries, as well as in aircraft parts.
13-8 is a precipitation-hardening stainless steel that has excellent strength, high hardness, superior toughness, and good corrosion resistance. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting.
15-5 is a martensitic precipitation-hardening stainless steel that provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C) and good toughness in both the longitudinal and transverse directions in both base metal and welds. Alloy 15-5 is the ferrite-free version of Type 17-4 stainless steel. Both alloys are widely used […]
17-7 stainless steel is a stable, chromium-nickel-aluminum precipitation hardened stainless steel that provides high strength and hardness, excellent fatigue properties, moderately resistant to corrosion, good formability, and minimum distortion upon heat treatment.
This grade is a high nitrogen and molybdenum bearing austenitic stainless steel that has a comparable or surpassing corrosion resistance to that of 316/316L and 317/317L plus approximately twice the yield strength at room temperature. The alloy does not become magnetic when cold worked, unlike many austenitic stainless steels.
Nitronic® 60 Stainless Steel is best known for its fretting, wear and galling resistance in the annealed condition by the addition of silicon and manganese. Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. Additionally, this grade provides excellent high-temperature oxidation resistance and […]
This alloy is a nitrogen strengthened austenitic stainless steel that has excellent resistance to corrosion at high temperatures and provides remarkably good properties at elevated temperatures. Nitronic® 40 is about twice the yield strength at room temperature as that of 304, 321, and 347.
Grade 302 is a slightly higher carbon version than 304. 302 stainless steel is an extremely tough, ductile grade that demonstrates superior corrosion resistance. It is a non-magnetic grade that is not hardenable by heat treating. It is generally used in the annealed condition and is noted for its ease of fabrication and formability.
Stainless 309 is an austenitic chromium nickel stainless steel and offers a better corrosion resistance than the type 304 because of higher percentages of nickel and chromium. Suitable for parts requiring both corrosion and heat resistance and oxidation resistance up to 2000 °F. Strength at elevated temperatures is similar to that of 18-8 Stainless Steels. […]
330 is an austenitic nickel-iron-chromium alloy metled as AOD melt type. This grade is comprised of approximately 36% nickel giving it excellent high temperature oxidation resistance up to 2200oF. 330 stainless remains fully austenitic at all temperatures and is not subject to embrittlement from sigma formation. It has a solid solution composition and is not […]
Stainless steel 310 is a medium carbon austenitic stainless steel, for high temperature applications such as furnace parts and heat treatment equipment. It is used at temperatures up to 1150°C in continuous service, and 1035°C in intermittent service. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger […]