Metal and Plastic Products
Cut and delivered on time to keep your business running strong.
Select Options
X-750 Nickel Alloy is a precipitation-hardenable nickel-chromium alloy known for its corrosion and oxidation resistance and high strength at temperatures to1500°F after suitable heat treatment. X-750 is creep-rupture strength at temperatures to about 1290oF and high tensile strength. This alloy is resistant to a wide variety of industrial corrosives under both oxidizing and reducing conditions. […]
Monel® K500 is a nickel-copper alloy with increased properties obtained by adding aluminum and titanium and by age hardening. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this […]
MP35N is a nickel-cobalt base alloy of the Multiphase alloy system that is work-strengthened and aged to obtain strength levels of 260 to 300 ksi, that has a unique combination of attributes – toughness, ductility, and stress corrosion cracking resistance. MP35N alloy resists corrosion in hydrogen sulfide, salt water and other chloride solutions, as well […]
MP159 is a nickel-based alloy of the multi-phase family of alloys possessing the unique combination of ultra-high strength, good ductility, tension strength and corrosion resistance. MP159 alloy exhibits ultimate tensile strength levels in excess of 265,000 psi while maintaining reduction of area values greater than 30% through age hardening and work strengthening. Excellent strength and […]
Waspaloy is an austenitic precipitation hardening, nickel-based alloy which has been used in high temperature applications, up to about 1800°F (980°C). The alloy has been used for gas turbine engine parts which require considerable strength and corrosion resistance at temperatures up to 1600°F (871°C). Waspaloy is usually vacuum-induction plus consumable electrode remelted. Waspaloy alloy can […]
Incoloy 825 is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing. It has an excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as chloride pitting and crevice corrosion. The […]
Incoloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, […]
Nickel Alloy 718 is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. High tolerance to extremely high and low temperatures allow 718 to be welded and annealed into products that will withstand extreme conditions. The ease and affordability with which this alloy can be fabricated, combined with good tensile, fatigue, creep, and […]
L605 is a cobalt-chromium-tungston-nickel alloy.L605 displays excellent high-temperature strength and excellent oxidation resistance to 2000°F. The material also has good sulfidation resistance and resistance to wear and galling. It is non-magnetic. The high chromium content makes it resistant to corrosion in a wide range of environments such as wet chlorine, hydrochloric acid and nitric acid. […]
Alloy 600 and 625 resists steam and mixtures of steam, air, and carbon dioxide. The alloy has excellent oxidation resistance to about 2100 °F (1149 °C). This series of alloys is well-known for its performance in extreme heat conditions—which makes each alloy variant extremely popular for use in furnace applications such as heat treating or […]
Maraging Alloy 250 is an age-hardenable iron-nickel steel (a 18% nickel, cobalt strengthened steel) with excellent properties, workability and heat treatment characteristics. Alloy 250 combines ultra-high strength (1800 MPa), good toughness, readily machinable in pre-aged condition, excellent transverse properties and resistance to crack propagation.
A-286 is an iron-nickel-chromium based austenitic alloy which is age hardening, high strength, and is often treated to provide superior creep strength.A-286’s most notable virtue is its wide temperature range. It can maintain high strength when faced with continuous exposure from -320 to 1300°F (700°C) and remains resistant to oxidation even when continuously exposed to […]